"W:INADYN: Error validating DYNDNS svr answer. Check usr,pass,hostname! (HTTP/1.1 200 OK"
Complete your DDNS configuration with the following information:
DDNS Service: Custom
Do not use external IP check: No
DYNDNS Server: members.dyndns.org (you do need the members subdomain)
User Name: [ your user name - usually not email ]
Password: [ your password ]
Host Name: [ your hostname as it shows on your account - usually hostname.dyndns.org ]
URL: /nic/update?
Additional DDNS Options: --dyndns_system dyndns@dyndns.org --ip_server_name checkip.dyndns.org:8245 /
Click on "Save" and then on "Apply Settings". You should see a sucessfull update at the status:
Sat Jul 27 16:59:37 2013: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.
Sat Jul 27 16:59:37 2013: I:INADYN: IP address for alias 'fakehost.dyndns.org' needs update to '1.1.1.1'
Sat Jul 27 16:59:37 2013: I:INADYN: Alias 'fakehost.dyndns.org' to IP '1.1.1.1' updated successfully.
15 comments:
Awesome, just saved me a ton of hassle. Do you think when you have a moment, you could explain what each line does in detail? don't want to be a newb forever, but not smart enough to move ahead without help, I'm afraid...
Thank You!
Thank you!
Thank you so much! This has been causing me a headache for a long time! :-)
Guess this trick quit working? I'm using an old firmware (SVN revision 14896. For some reason the URL and Additional Options boxes highlight with this info and won't update. Any help appreciated!
Have just found this tip. And it worked for me. build 14929.
Thank you!!!
Thank you! Worked with DDWRT build 23598
Thanks very much saved me a lot of time!!
thank you ... it worked without "Additional DDNS Options".
Many thanks, your trick solved definitely my two dynamic entries "flapping" all the time.
Still works! Thanks.
Still works! Thanks! Where did you get the info for this? I looked all over the dyn.com site and didn't see any of it.
Thanks a million Victor!
you saved me hours :)
Hooray! Thank you so much! Still works!
Thanks man! settings are working perfect!
Post a Comment